Brake servo and master cylinder 3.8 Series 1
Series 1 3.8 RHD to 850232/860020 (OTS/FHC) and LHD 875858/885104 (OTS/FHC) (1961)
Requires: 1
Series 1 3.8 RHD from 850233/860021 (OTS/FHC) and LHD 875859/885105 (OTS/FHC) (1961-1964)
Requires: 1
counter bearing of pedal shaft
3.8 Series 1 OTS from 850001 to 850232(RHD) and from 875001 to 875858(LHD), FHC from 860001 to 860020 (RHD) and from 885001 to 885104 (LHD) (1961-62)
Requires: 1
counter bearing of pedal shaft
3.8 Serie 1 OTS from 850233 to 850943 (RHD) and from 875859 to 881887 (LHD), FHC from 860021 to 861799 (RHD) and from 885105 to 890873 (LHD) (1962-64)
Requires: 1
pedal shaft
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) (1962-64)
Requires: 1
retaining bearing housing
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) (1962-64)
Requires: 2
retaining bearing housing
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) (1962-64)
Requires: 2
RHD-models
Requires: 1
brake pedal
Series 1 3.8 OTS to 850474 (RHD) and 876998 (LHD) and FHC to 860374 (RHD) and 885870 (LHD) (1961)
Requires: 1
brake pedal
Series 1 3.8 OTS from 850475 (RHD) and 876999 (LHD) and from FHC 860375 (RHD) and 885871 (LHD) (1961)
Requires: 1
retaining master cylinder and servo brackets to pedal housing
Requires: 9
retaining master cylinder and servo brackets to pedal housing
Requires: 8
retaining master cylinder and servo brackets to pedal housing
Requires: 8
rear brakes. Characteristic: adjustable push rod
Requires: 1
front brakes. Characteristic: non adjustable push rod
Requires: 1
Brake pressure distribution
3.8 Series 1 OTS from 850001 to 850376 (RHD) and from 875001 to 876638 (LHD) and from 860001 to 860192 (RHD) and from 885001 to 885571 (LHD) (1961)
Requires: 1
Brake pressure distribution
3.8 Series 1 OTS from 850377 (RHD) and from 876639 (LHD) and from 860193 (RHD) and from 885572 (LHD) (1962-1964)
Requires: 1
compensator bracket to end-connector
Requires: 4
compensator braket
Requires: 1
end-connector
Requires: 1
Requires: 1
Requires: 1
3.8 Series 1 OTS from 850001 to 850649 (RHD) and from 875001 to 878963 (LHD) and from 860001 to 861079 (RHD) and from 885001 to 888168(LHD) (1961)
Requires: 1
3.8 Series 1 OTS from 850650(RHD) and from 878964 (LHD) as well as from 861080 (RHD) and from 888169 (LHD) (1962-1964)
Requires: 1
between pedal shaft and servo
3.8 Series 1 OTS from 850001 to 850474 (RHD) and from 875001 to 876998 (LHD) and from 860001 to 860374 (RHD) and from 885001 to 885870 (LHD) - Except 860365 (1961-1962)
Requires: 1
between pedal shaft and servo
3.8 Series 1 OTS from 850475 to 850649 (RHD) and from 876999 to 878963 (LHD) and from 860375 to 861079 (RHD) and from 885871 to 888168 (LHD) - Also up to 860365 (1962)
Requires: 1
between pedal shaft and servo
3.8 Series 1 OTS from 850650 (RHD) and from 878964 (LHD) and from 861080 (RHD) and from 888169 (LHD) (1963-64)
Requires: 1
curved - for lever, on upper pin of pedal shaft
Requires: 1
brake servo
Requires: 1
for operating lever
3.8 Series 1 OTS from 850001 to 850474 (RHD) and from 875001 to 876998 (LHD) and from 860001 to 860374 (RHD) and from 885001 to 885870 (LHD) - Except 860365 (1961-1962)
Requires: 1
for operating lever
3.8 Series 1 OTS from 850475 (RHD) and from 876999 (LHD) and from 860375 (RHD) and from 885871 (LHD) - Also to 860365 (1962-64)
Requires: 1
retaining operating lever on pedal shaft, lower position
Requires: 1
retaining operating lever on pedal shaft, lower position
Requires: 1
for Dunlop brake servo 242547, outer diameter: 1/2"
Requires: 1
in upper connecting lever servo
Requires: 1
retaining brake pedal to shaft
Requires: 1
pedal shaft - between clutch an brake padal
Requires: 1
behind circlip pedal shaft
Requires: 1
rear brakes
Requires: 1
