Clutch hydraulics
cast-iron Dunlop style cylinder with a 90-degree angle between
E-Type Series 1 and 1.5 (1961-68) - OTS models to 1E2184 and 1E18368, FHC models to 1E21959 and 1E35815, 2+2 models to 1E51379 and 1E79222
Requires: 1
for original Dunlop clutch master cylinder with 3/4" bore size
E-Type Series 1 and 1.5 (1961-68) - OTS models to 1E2184 and 1E18368, FHC models to 1E21959 and 1E35815, 2+2 models to 1E51379 and 1E79222
Requires: 1
clutch master cylinder. As well rep. kit for clutch master sylinder ID 877
Series 2 (1968-1970)
Requires: 1
clutch master cylinder
Series 1 and 2 (1961-70)
Requires: 1
round type - comes less cap
Series 1 3.8 OTS to 850555 (RHD models) and 877556 (LHD models), FHC to 860677 (RHD models) and 886282 (LHD models) (1961)
Requires: 1
clutch fluid reservoir
Series 1 3.8 OTS to 850555 (RHD models) and 877556 (LHD models), FHC to 860677 (RHD models) and 886282 (LHD models)(1961)
Requires: 1
for filler cap on brake fluid reservoir
Series 1 3.8 OTS to 850555 (RHD models) and 877556 (LHD models), FHC to 860677 (RHD models) and 886282 (LHD models) (1961)
Requires: 1
for round brake fluid reservoirs - reproduction in stainless steel
Series 1 3.8 RHD models OTS to 850555, FHC to 860677 (1961)
Requires: 1
for round brake fluid reservoirs - reproduction in stainless steel
Series 1 3.8 LHD Models OTS to 877556, FHC to 886282 (1961)
Requires: 1
clutch hydraulics - square type
Series 1 3.8 OTS from 850556 (RHD models) and 877557 (LHD models), FHC from 860678 (RHD models) and 886283 (LHD models) plus all 4.2 Series 1 and 2 (1964-70)
Requires: 1
Flüssigkeitsbehälter Kupplung
Series 1 3.8 OTS from 850556 (RHD models) and 877557 (LHD models), FHC from 860678 (RHD models) and 886283 (LHD models) plus all 4.2 Series 1 and 2 (1964-70)
Requires: 1
for square brake fluid reservoir
Series 1 3.8 RHD models OTS from 850556, FHC from 860678 (1962)
Requires: 1
for square brake fluid reservoirs
Series 1 4.2 litre and 2 RHD models (1964-70)
Requires: 1
for square brake fluid reservoirs - reproduction in stainless steel
Series 1 4.2 litre and Series 2 RHD models (1964-70)
Requires: 1
for square brake fluid reservoirs
Serie 1 3.8 LHD models OTS from 877557, FHC from 886283 plus all 4.2 Series 1 and 2 (1964-70)
Requires: 1
for square brake fluid reservoirs - reproduction in stainless steel
Serie 1 3.8 LHD models from 877557, FHC from 886283 plus all 4.2 Series 1 and 2 (1964-70)
Requires: 1
identified by 80 mm length
Series 1 3.8 litre und Series 1 4.2 to engine no. 7E4606
Requires: 1
identified by 95 mm length
Series 1 4.2 litre from engine no. 7E4607 and all 2+2 models
Requires: 1
reproduction with 95 mm length
Series 2 (1968-70)
Requires: 1
identify by 95 mm length
Series 2 (1968-70)
Requires: 1
clutch slave cylinder - complete unit with steady pin, bush and adjustable push rod
Requires: 1
for clutch slave cylinder fork - improved version, secured with split pin
Requires: 1
for clutch slave cylinder fork - original style
Requires: 1
Series 1 3.8 RHD to chassis no. 850232/860020 (OTS/FHC) (1961)
Requires: 1
Series 1 3.8 LHD to chassis no. 875858/885104 (OTS/FHC) (1961)
Requires: 1
Series 1 3.8 litre RHD from 850233/860021 (OTS/FHC) and Series 1 4,2 Liter RHD (OTS/FHC) (1961-1967)
Requires: 1
for LHD models
3.8 Series 1 OTS from 875859 to 881887 and FHC from 885105 to 890873 (1961-64) plus 4.2 Series 1 OTS from 1E10001 to 1E15888 and FHC from 1E30001 to 1E34249 (1964-67)
Requires: 1
for RHD models
Series 1.5 and 2 RHD (1967-1970) and all 2+2 RHD (1966-1970)
Requires: 1
for LHD models
Series 1.5 and 2 (1967-1970) and all 2+2 (1966-1970)
Requires: 1
pedal shaft - between clutch an brake pedal
Series 1 OTS and FHC (1961-1967)
Requires: 1
pedal shaft - between clutch an brake pedal
Series 1.5 and 2 (1967-1970) and all 2+2 (1966-1970)
Requires: 1
clutch pedal
Series 1 3.8 to RHD 850474/860374 (OTS/FHC) and LHD 876998/885870 (OTS/FHC) (1961)
Requires: 1
clutch pedal
Series 1 3.8 from RHD 850475/860375 (OTS/FHC) and LHD 876999/885871 (OTS/FHC) and Series 1 4.2 OTS und FHC (1961-1967)
Requires: 1
clutch pedal
Serie 1.5 und 2 (1967-1970) und alle 2+2 (1966-1970)
Requires: 1
retaining pedal pad
Series 1 OTS and FHC (1961-1967)
Requires: 1
retaining pedal pad
Series 1.5 and 2 (1967-1970) and all 2+2 (1966-1970)
Requires: 1
clutch master cylinder
Series 1 4.2 litre and Series 2 (1964-70)
Requires: 1
between pedal box and bulkhead
Series 1 OTS and FHC (1961-1967)
Requires: 1
between pedal box and bulkhead
4.2 Series 1.5 and 2 (1967-1970) also all 2+2 (1966-70)
Requires: 1
Series 1 3.8 RHD to 850232/860020 (OTS/FHC) and LHD 875858/885104 (OTS/FHC) (1961)
Requires: 1
Series 1 3.8 RHD from 850233/860021 (OTS/FHC) and LHD 875859/885105 (OTS/FHC) (1961-1964)
Requires: 1
with brake and clutch pedal. For LHD models with manual transmission
4.2 Series 1 OTS and FHC models (1964-67)
Requires: 1
with brake and clutch pedal. For RHD models with manual transmission
4.2 Series 1 OTS and FHC models (1964-67)
Requires: 1
4.2 Series 1.5 and Series 2 OTS and FHC models (1967-70) plus all 2+2 models (1966-70)
Requires: 1
with brake and clutch pedal. For LHD models with manual transmission
4.2 Series 1.5 and Series 2 OTS and FHC models (1967-70) plus all 2+2 models (1966-70)
Requires: 1
with brake and clutch pedal. For RHD models with manual transmission
4.2 Series 1.5 and Series 2 OTS and FHC models (1967-70) plus all 2+2 models (1966-70)
Requires: 1
4.2 Series 1 OTS and FHC (1961-1967)
Requires: 1
4.2 Series 1.5 and 2 (1967-1970) also all 2+2 (1966-70)
Requires: 1
clutch and brake pedal shaft
Series 1 OTS and FHC (1961-1967)
Requires: 1
counter bearing of pedal shaft
3.8 Series 1 OTS from 850001 to 850232(RHD) and from 875001 to 875858(LHD), FHC from 860001 to 860020 (RHD) and from 885001 to 885104 (LHD)(1961-62)
Requires: 1
counter bearing of pedal shaft
3.8 Series 1 OTS from 850233 to 850943 (RHD) and from 875859 to 881887 (LHD), FHC from 860021 to 861799 (RHD) and from 885105 to 890873 (LHD) (1962-64)
Requires: 1
counter bearing of pedal shaft
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Requires: 1
pedal shaft
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) to 4.2 Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD) (1962-67)
Requires: 1
retaining bearing housing
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) to 4.2 Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1962-67)
Requires: 2
retaining bearing housing
3.8 Series 1 OTS from 850233 and 875859 (LHD) and FHC 860021 (RHD) and from 885105 (LHD) to 4.2 Series 1 OTS to 1E1863 (RHD) and 1E15888 (LHD), FHC to 1E21583 (RHD) and 1E34249 (LHD), 2+2 to 1E50974 (RHD) and 1E77644 (LHD) (1962-67)
Requires: 2
retaining pedal shaft
4.2 Series 1.5 and 2 (1967-1970) also all 2+2 (1966-70)
Requires: 1
under hose bracket
Series 1 and Series 1.5 all OTS and FHC models (1961-1968)
Requires: 1
under hose bracket
Series 2 all OTS and FHC models (1968-1970) and all 2+2 models (1966-1970
Requires: 1
clutch master cylinder to connector
Series 1 RHD OTS to 1E1863, FHC to 1E21583 and 2+2 to 1E50974 (1961-68)
Requires: 1
clutch master cylinder to connector
Series 1 LHD OTS to 1E15888 , FHC to 1E34249 and 2+2 to 1E77644 (1961-68)
Requires: 1
between clutch master cylinder and reservoir. For RHD models
Serie 2 RHD (1968-70)
Requires: 1
clutch master cylinder to connector
Serie 2 LHD (1968-70)
Requires: 1
clutch master cylinder to reservoir
3.8 Series 1 (1961-64)
Requires: 1
between clutch master cylinder and reservoir. For LHD models
3.8 Series 1 (1961-64)
Requires: 1
between clutch master cylinder and reservoir. For RHD models
4.2 Series 1 and 1.5 (1964-68)
Requires: 1
between clutch master cylinder and reservoir. For LHD models
4.2 Series 1 and 1.5 (1964-68)
Requires: 1
between clutch master cylinder and reservoir. For RHD models
4.2 Series 2 (1968-70)
Requires: 1
between clutch master cylinder and reservoir. For LHD models
4.2 Series 2 (1968-70)
Requires: 1
reservoir to pipe. Identify by: length 65cm
All RHD models
Requires: 1
reservoir to pipe. Identify by: length 30cm
All LHD models
Requires: 1
complete vehicle set - pre-lengthened, not pre-bent
Series 1 to Series 2 all RHD models (1961-70)
Requires: 1
complete vehicle set - pre-lengthened, not pre-bent
Series 1 3.8 litre LHD models (1961-64)
Requires: 1
complete vehicle set - pre-lengthened, not pre-bent
Serise 1 4.2 litre and Series 2 LHD models (1964-70)
Requires: 1
for pipe - reservoir to master cylinder
All LHD models
Requires: 1
pre bend, shaped and flared
Series 1 3.8 litre LHD OTS from 875001 to 881887 and FHC from 885001 to 890873 (1961-64
Requires: 1
pre bend, shaped and flared - for LHD models
4.2 Series 1 (1964-67) - OTS from 1E10001 to 1E15888, FHC from 1E30001 to 1E34249, 2+2 from 1E75001 to 1E77644
Requires: 1
pre bend, shaped and flared
Series 2 4.2 litre LHD OTS from 1R7001, FHC from 1R25001), 2+2 from 1R40001 (1968-70)
Requires: 1
