Accelerator pedal with linkage - 4.2 Series 1 and 2 (1964-70)
for RHD models with manual transmission
E-Type Series 1 and 1.5 (1961-68)
Requires: 1
Series 2 RHD models OTS and FHC (1968-70) plus all 2+2 models (1966-70)
Requires: 1
accelerator pedal
RHD models with manual transmission
Requires: 1
accelerator pedal
RHD models with automatic transmission
Requires: 1
pedal housing
RHD models
Requires: 1
pedal shaft
RHD models
Requires: 2
retaining accelerator pedal to pedal box
RHD models
Requires: 1
retaining accelerator pedal to pedal box
RHD models
Requires: 1
retaining accelerator pedal to pedal box
RHD models
Requires: 1
retaining bracket accelerator linkage
RHD models
Requires: 2
securing operating lever to bracket accelerator linkage
RHD models
Requires: 2
securing operating lever to bracket accelerator linkage
RHD models
Requires: 2
securing operating lever to bracket accelerator linkage
RHD models
Requires: 2
securing operating lever to bracket
RHD models
Requires: 1
securing operating lever to bracket
RHD models
Requires: 1
throttle linkage - stainless steel reproduction
RHD models
Requires: 1
stainless steel, polished. Supplied in a 15 piece kit for RHD models
E-Type 4.2 Series 1 and 1.5 (1964-68)
Requires: 1
stainless steel, polished. Supplied in a 15 piece kit for RHD models
E-Type 4.2 Series 2 (1968-70)
Requires: 1
front spindle
RHD models with automatic transmission
Requires: 1
front spindle
RHD models with automatic transmission
Requires: 1
RHD models - not suitable for Stromberg carburettors
Requires: 3
for LHD`models
4.2 Series 1 and 2 (1964-70): OTS and FHC models
Requires: 1
for LHD models
4.2 Series 1 and 2 (1966-70): 2+2 models
Requires: 1
accelerator pedal
Series 1 4.2 litre LHD models except (2+2) (1964-68)
Requires: 1
accelerator pedal
4.2 Series 1 and 2 LHD models (1966-70) - OTS from 1E13012, FHC from 1E32943, 2+2 from 1E75001
Requires: 1
between accelerator pedal and drop arm. Set of two
LHD models
Requires: 1
securing rods
LHD models
Requires: 1
pedal shaft
LHD models
Requires: 1
under pedal box
LHD models
Requires: 4
retaining pedal box
LHD models
Requires: 4
operating lever to pedal box
LHD models
Requires: 1
throttle linkage - feature: eccentric bore
LHD models
Requires: 2
retaining throttle linkage
All Series 1 4.2 LHD models and Series 2 LHD OTS and FHC models
Requires: 2
throttle linkage retaining plate. For LHD models
Requires: 1
throttle linkage
All Series 1 4.2 LHD models and Series 2 LHD OTS and FHC models
Requires: 1
throttle linkage
Series 2 2+2 LHD models
Requires: 1
securing operating lever
Series 1 4.2 litre all LHD models, Series 2 LHD 2+2 models only
Requires: 1
securing operating lever
Series 2 OTS and FHC LHD models
Requires: 1
throttle linkage - stainless steel reproduction
Series 1 4.2 litre LHD all, Series 2 except USA and Kanada models
Requires: 1
securing operating lever
Series 1 4.2 litre LHD all, Series 2 except USA and Kanada models
Requires: 1
securing operating lever
Series 2 4.2 litre USA and Kanada models to engine no. 7R1837 (OTS/FHC) and to 7R35329 (2+2) (1968)
Requires: 1
securing operating lever
Series 2 4.2 litre USA and Kanada models to engine no. 7R1837 (OTS/FHC) and to 7R35329 (2+2) (1968)
Requires: 1
stainless steel, polished. Supplied in a 17 piece kit for LHD models
E-Type 4.2 Series 1 and 1.5 (1964-68)
Requires: 1
stainless steel, polished. Supplied in a 15 piece kit for LHD models
E-Type 4.2 Series 2 (1968-70)
Requires: 1
front spindle
LHD models with manual trabsmission
Requires: 1
front spindle
LHD models with automatic transmission
Requires: 1
