Throttle linkage automatic models - 4.2 Series 1 and 2 (1966-70)
for accelerator linkage
RHD models
Requires: 1
gas actuation
RHD models
Requires: 1
front linkage to kickdown shaft
RHD models
Requires: 1
to idler shaft
RHD models
Requires: 1
securing lever to idler shaft
RHD models
Requires: 1
with 20.5" length
Series 1 2+2 RHD models from engine no. 7E50001 to 7E51451 (1966-67)
Requires: 1
identify by: length 31"
Series 1 2+2 RHD models from engine no. 7E51452 (1967-68)
Requires: 1
with 20.5" length
All Series 2 RHD models from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2) (1968-70)
Requires: 1
retaining outer cable
RHD models
Requires: 1
retaining bracket
RHD models
Requires: 1
retaining kick-down cable to lever
RHD models
Requires: 2
kick-down control
RHD models
Requires: 1
kick-down control
RHD models
Requires: 1
retaining kick-down cable to transmission unit
RHD models
Requires: 1
retaining kick-down cable to transmission unit
RHD models
Requires: 1
for accelerator linkage
All Serie 1 4.2 litre LHD models (1964-1968), all Series 2 LHD models except USA and Kanada (1968-1970)
Requires: 1
for accelerator linkage
Series 2 models USA and Canada to engine no. 7R35329 (2+2) (1968)
Requires: 1
for accelerator linkage
Series 2 models USA and Canada from engine no. 7R35330 (2+2) (1969-70))
Requires: 1
for accelerator linkage
All Serie 1 4.2 litre LHD models (1964-1968), all Series 2 LHD models except USA and Kanada (1968-1970)
Requires: 1
for accelerator linkage
Series 2 models USA and Canada to engine no. 7R35329 (2+2) (1968)
Requires: 1
for accelerator linkage
Series 2 models USA and Canada from engine no. 7R35330 (2+2) (1969-70))
Requires: 1
front linkage to kickdown shaft
All Serie 1 4.2 litre LHD models (1964-1968), all Series 2 LHD models except USA and Kanada (1968-1970)
Requires: 1
front linkage to kickdown shaft
Series 2 models USA and Canada to engine no. 7R35329 (2+2) (1968)
Requires: 1
front linkage to kickdown shaft
Series 2 models USA and Canada from engine no. 7R35330 (2+2) (1969-70)
Requires: 1
to idler shaft
LHD models
Requires: 1
securing lever to idler shaft
LHD models
Requires: 1
retaining outer cable
LHD models
Requires: 1
with 20.5" length
Series 1 2+2 LHD models from engine no. 7E50001 to 7E51451 (1966-67)
Requires: 1
identify by: length 31"
Series 1 2+2 LHD models from engine no. 7E51452 (1967-68)
Requires: 1
with 20.5" length
All Series 2 LHD models from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2) (1968-70)
Requires: 1
retaining kick-down cable to lever
LHD models
Requires: 2
retaining bracket
LHD models
Requires: 1
kick-down control
LHD models
Requires: 1
kick-down control
LHD models
Requires: 1
retaining kick-down cable to transmission unit
LHD models
Requires: 1
retaining kick-down cable to transmission unit
LHD models
Requires: 1
