Crankshaft 4.2 litre
upper - uprated double row endless chain with 100 pitches
Requires: 1
upper timing chain
Series 1 4.2 ab 7E5168, all 2+2 and Series 2
Requires: 1
camshaft sprocket - feature: fixed with 2 screws
Requires: 2
double row - variant for separate plate for timing adjustment
Requires: 2
lower - uprated double row endless chain with 82 pitches
Requires: 1
timing cover - two-piece
All Series 1 4.2, Series 2 OTS, FHC to engine no. 7R1914 and 2+2 to 7R35388
timing cover - two-piece
Series 2 OTS, FHC from engine no.7R1915, 2+2 from 7R35389
Requires: 1
timing cover to cylinder block - length: 2"
series 1 4.2
Requires: 1
timing cover and generator shield to cylinder block - length: 1.7/8"
series 1 4.2
Requires: 1
timing cover to cylinder block - length: 2.1/2"
series 1 4.2
Requires: 1
timing cover to cylinder block - length: 1.1/2"
series 1 4.2
Requires: 3
timing cover and water pump to cylinder block
Series 1 4.2 from engine no. 7E1001 to 7E1404
Requires: 2
timing cover and water pump to cylinder block - length: 3.1/4"
Series 1 4.2 from engine no. 7E1405
Requires: 2
timing cover and water pump to cylinder block
Series 1 4.2 from engine no. 7E1001 to 7E1404
Requires: 3
timing cover and water pump to cylinder block - length: 1.7/8"
Series 1 4.2 from engine no. 7E1405
Requires: 3
timing cover and water pump to cylinder block - length: 2.3/4"
Series 1 4.2
Requires: 2
timing cover and ignition lead camp to cylinder block - length: 2.3/4"
Series 1 4.2
Requires: 2
timing cover to cylinder block - length: 2.1/2"
Series 2
Requires: 1
timing cover to cylinder block - length: 1.1/2"
Series 2
Requires: 3
timing cover and water pump to cylinder block - length: 3.1/4"
Series 2
Requires: 2
water pump to timing cover - length: 1.1/2"
Series 2
Requires: 2
timing cover and water pump to cylinder block - length: 2.3/4"
Series 2
Requires: 1
timing cover, generator bracket and water pump to cylinder block - length: 3.1/4"
Series 2
Requires: 1
timing cover, generator bracket and water pump to cylinder block - length: 2.3/4"
Series 2
Requires: 1
timing cover and water pump to cylinder block - length: 2.3/4"
Series 2
Requires: 1
timing cover and water pump to cylinder block - length: 1.1/8"
Series 2
Requires: 1
Bracket, timing cover to cylinder block - length: 1.3/4"
Requires: 2
on oil sump
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 to October 1968: OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388
Requires: 1
on timing cover
4.2 Series 2 from October 1968 onwards: OTS and FHC models from engine no. 7R1915 and 2+2 models from engine no. 7R35389
Requires: 1
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 6
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 6
+0.030" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 6
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 6
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 6
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 6
+0.030" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 6
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 6
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
+0.030" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 9.0:1
Requires: 1
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
+0.030" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
standard size. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
+0.020" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
+0.040" oversize. Specifications: 4235cc. six cylinder engine, 3-ring piston, standard bore size: 3.625", compression ratio: 8.0:1
Requires: 1
standard size. Specifications: 4235cc. six cylinder engine with 3 ring pistons with 8:1 and 9:1 compression ratio, standard bore size: 3.625"
Requires: 1
+0.020" oversize. Specifications: 4235cc. six cylinder engine with 3 ring pistons with 8:1 and 9:1 compression ratio, standard bore size: 3.625"
Requires: 1
+0.030" oversize. Specifications: 4235cc. six cylinder engine with 3 ring pistons with 8:1 and 9:1 compression ratio, standard bore size: 3.625"
Requires: 1
+0.040" oversize. Specifications: 4235cc. six cylinder engine with 3 ring pistons with 8:1 and 9:1 compression ratio, standard bore size: 3.625"
Requires: 1
reconditioned, in exchange - feature: no oil channel to small end
Requires: 6
reconditioned, in exchange - feature: with oil channel to small end
Requires: 6
genuine Jaguar part
Requires: 12
standard size - shaft diameter: 2.086"
Requires: 1
+0.010" oversize - shaft diameter: 2.086"
Requires: 1
+0.020" oversize - shaft diameter: 2.086"
Requires: 1
+0.030" oversize - shaft diameter: 2.086"
Requires: 1
+0.040" oversize - shaft diameter: 2.086"
Requires: 1
+0.060" oversize - shaft diameter: 2.086"
Requires: 1
crankshaft - variant for "w" type (duplex) fan belt
Series 1 4.2 and Serie 1.5 OTS to 1E2184 and 1E18368, FHC to 1E21959 and 1E35815, 2+2 to 1E51379 and 1E79222 (1964-68)
Requires: 1
crankshaft
Series 2 OTS from 1R1001 and 1R7001, FHC from 1R20001 and 1R25001, 2+2 from 1R35001 and 1R40001 (1968-70)
Requires: 1
crankshaft
From engine no: 7L42955 - non air conditioning
Requires: 1
crankshaft
Series 1 4.2 from engine no. 7E10958 OTS/FHC and from 7E50628 (2+2), all Series 2 (1968-70)
Genuine specification
Requires: 1
behind crankshaft damper
New version with 'O' ring instead of keyway
Requires: 1
without bearings - outright, perfectly overhauled, ground and straightened
Requires: 1
with bearings assembly - reconditioned, in exchange
Requires: 1
+0.010" oversize - shaft diameter of the standard bearing: 2.750"
Requires: 1
+0.020" oversize - shaft diameter of the standard bearing: 2.750"
Requires: 1
+0.030" oversize - shaft diameter of the standard bearing: 2.750"
Requires: 1
+0.040" oversize - shaft diameter of the standard bearing: 2.750"
Requires: 1
for models with manual transmission - reconditioned, in exchange
Models with manual transmission
Requires: 1
clutch cover to flywheel - centre
Models with manual transmission
Requires: 2
clutch cover to flywheel
Models with manual transmission
Requires: 2
flywheel to crankshaft
Models with manual transmission
Requires: 10
Automatic transmission.
Requires: 1
drive plate
Automatic transmission
to engine no. 8L109585
Requires: 2
flywheel to crankshaft
Automatic transmission
to engine no. 8L109585
Requires: 10
