Crankshaft
upper bolt - timing chain tensioner attachment and crankshaft
Requires: 1
lower bolt - timing chain tensioner attachment
Requires: 1
timing chain tensioner
Requires: 1
lower bolt - timing chain tensioner attachment
Requires: 1
timing chain tensioner
Requires: 1
upper and lower - uprated double row endless chain with 180 pitches
Requires: 1
upper and lower - aftermarket chain with 180 pitches
Requires: 1
upper and lower
Requires: 1
for distributor drive
Requires: 1
auxiliary shaft - 3 piece set
Requires: 1
lower bolt - timing chain tensioner attachment
Requires: 2
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Requires: 12
with Goetze liner assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Requires: 12
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Requires: 1
with liners assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Requires: 1
standard, 3 ring piston. 2 compression rings, 1 oil ring
kit for 1 engine
Requires: 1
for one piston. Standard size for 3 ring piston (2 compression rings, 1 oil ring)
Requires: 12
for piston rings with a diameter from 69 to 175 mm. Depth: 100 mm
Requires: 1
standard size - shaft diameter: 2.30"
Requires: 1
+0.030" - shaft diameter: 2.30"
Requires: 1
for one piston. Standard size for 3 ring piston (2 compression rings, 1 oil ring)
Requires: 12
crankshaft - reconditioned, in exchange
to engine no. 7S10798
Requires: 1
crankshaft - reconditioned, in exchange
from engine no 7S10799
Requires: 1
crankshaft
Requires: 1
without bearings - new item
Requires: 1
standard size - shaft diameter: 3.001"
Requires: 1
with +0.010" oversize - shaft diameter of the standard bearing: 3.001"
Requires: 1
with +0.020" oversize - shaft diameter of the standard bearing: 3.001"
Requires: 1
with +0.030" oversize - shaft diameter of the standard bearing: 3.001"
Requires: 1
manual gearbox
to engine no 7S7000
Requires: 1
for vehicles with manual transmission - identify by 160 teeth ring gear
from engine no 7S7001
Requires: 1
clutch cover to flywheel, diameter: 1/2", length: 13/16" - manual and automatic transmission
Requires: 2
flywheel automatic gearbox
Requires: 1
new item for vehicles with automatic transmission - identify by 160 teeth ring gear
Requires: 1
drive plate - for vehicles with automatic transmission
Requires: 1
