Rear brakes including handbrake mechanism
rear. Identify by 264 mm diameter - supplied in pairs
Requires: 1
rear. Identify by 264 mm diameter - supplied in pairs
Requires: 1
RH rear - new item
all XJ12 Series I, XJ12 Series II to end of 1975: (to 2R54650, 2R3968, 2G50661, 2G1145, 2K50114, 2K2227, 2F50012, 2F1062, 2P50113 and 2P1920
Requires: 1
LH rear - new item
all XJ12 Series I, XJ12 Series II to end of 1975: (to 2R54650, 2R3968, 2G50661, 2G1145, 2K50114, 2K2227, 2F50012, 2F1062, 2P50113 and 2P1920
Requires: 1
RH rear - new item
XJ12 Series 2 from end of 1975 ( from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 1
LH rear - new item
XJ12 Series 2 from end of 1975 ( from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 1
RH rear - reconditioned, in exchange
all XJ12 Series I, XJ12 Series II to end of 1975: (to 2R54650, 2R3968, 2G50661, 2G1145, 2K50114, 2K2227, 2F50012, 2F1062, 2P50113 and 2P1920
Requires: 1
LH rear - reconditioned, in exchange
all XJ12 Series I, XJ12 Series II to end of 1975: (to 2R54650, 2R3968, 2G50661, 2G1145, 2K50114, 2K2227, 2F50012, 2F1062, 2P50113 and 2P1920
Requires: 1
RH - exchange
XJ12 Series 2 from end of 1975 ( from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 1
LH - exchange
XJ12 Series 2 from end of 1975 ( from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 1
rear brake caliper bridge - bended two piece set in steel
Requires: 2
rear. This kit services one caliper
All Series I - Series II: Jaguar Saloon to 2R54650 (LHD) and 2R3968 (RHD), Jaguar Coupe to 2G50661 (LHD) and 2G1145 (RHD), Daimler Saloon to 2K50114 (LHD) and 2K2227 (RHD), Daimler Coupe to 2F50012 (LHD) and 2F1062 (RHD), Vanden Plas to 2P50113 (LHD) and 2P1920 (RHD)
Requires: 2
rear. This kit services one caliper
Series II: Jaguar Saloon from 2R54651 (LHD) and 2R3969 (RHD), Jaguar Coupe from 2G50662 (LHD) and 2G1146 (RHD), Daimler Saloon from 2K50115 (LHD) and 2K2228 (RHD), Daimler Coupe from 2F50013 (LHD) and 2F1063 (RHD), Vanden Plas from 2P50114 (LHD) and 2P1921 (RHD) - all Series III
Requires: 2
rear brake caliper. Identify by 43 mm diameter
All Series I - Series II: Jaguar Saloon to 2R54650 (LHD) and 2R3968 (RHD), Jaguar Coupe to 2G50661 (LHD) and 2G1145 (RHD), Daimler Saloon to 2K50114 (LHD) and 2K2227 (RHD), Daimler Coupe to 2F50012 (LHD) and 2F1062 (RHD), Vanden Plas to 2P50113 (LHD) and 2P1920 (RHD)
Requires: 4
rear brake caliper - stainless steel. Identify by 43 mm diameter
All Series I - Series II: Jaguar Saloon to 2R54650 (LHD) and 2R3968 (RHD), Jaguar Coupe to 2G50661 (LHD) and 2G1145 (RHD), Daimler Saloon to 2K50114 (LHD) and 2K2227 (RHD), Daimler Coupe to 2F50012 (LHD) and 2F1062 (RHD), Vanden Plas to 2P50113 (LHD) and 2P1920 (RHD)
Requires: 4
rear brake caliper - black anodised. Identified by 43 mm diameter
XJ12 Series 2 from end of 1975 (from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 4
rear brake caliper - stainless steel. Identified by 43 mm diameter
XJ12 Series 2 from end of 1975 (from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 4
rear brake caliper - chromed. Identified by 43 mm diameter
XJ12 Series 2 from end of 1975 (from 2R3969, 2R54651, 2P1921, 2P50114 2K2228, 2K50115, 2G1146, 2G50652, 2F1063, 2F50013, all XJ12 Series 3 (1979-92)
Requires: 4
rear - M1802 (formerly M1144) specification
Requires: 1
rear brake pads. Contents: 4 retaining pins and 4 securing clips
Requires: 1
LH - reconditioned, in exchange
Series I and II
Requires: 1
RH - reconditioned, in exchange
Series I and II
Requires: 1
handbrake pads - contents: 4 screws, 4 nuts, 4 shakeproof washers
Requires: 1
handbrake pads - LH outer
Requires: 2
handbrake pads - RH inner
Requires: 2
handbrake pads - LH inner
Requires: 2
handbrake operating lever - inner
Requires: 2
handbrake operating lever - outer
Requires: 2
handbrake mechanism to brake caliper - stainless steel
Alternatives
Requires: 4
handbrake pads - reproduction with fitting lugs with 1.7/8" apart
Reproduction made from high quality steel
Requires: 2