Exhaust manifold

exhaust manifold to cylinder head - aftermarket gasket with 1.7/16" internal diameter

exhaust manifold to cylinder head - modern hig tech version with 1.7/16" internal diameter

exhaust manifold to cylinder head - internal diameter: 1.9/16"

exhaust to manifold

exhaust to manifold

exhaust to manifold - height: 7/16"

Alternatives

exhaust to manifold - height: 3/8"

Alternatives

down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm

heat shield to manifold

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

manifold to head - short

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

manifold to head - long

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

RH rear

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

LH rear

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

RH front

Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818

heat shield to manifold

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

manifold to head - short

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

manifold to head - long

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

RH rear

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

LH rear

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

RH front

Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

for 3/8" pipe

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

gas recirculation pipe to exhaust manifold

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)

Series I: all countries less USA and Canada from engine no. 7P3819 - Series II: all countries less USA and Canada to engine no. 7P25000 (carburettor cars without gas recirculation system)

Series I: all countries less USA and Canada from engine no. 7P3819 - Series II: all countries less USA and Canada to engine no. 7P25000 (carburettor cars without gas recirculation system)

heat shield to manifold

Series II from engine no. 7P25001 - Series III (fuel injection cars)

Series II from engine no. 7P25001 - Series III (fuel injection cars)

Series II from engine no. 7P25001 - Series III (fuel injection cars)

Series II from engine no. 7P25001 - Series III (fuel injection cars)

Series II from engine no. 7P25001 - Series III (fuel injection cars)

RH rear

Series II from engine no. 7P25001 - Series III (fuel injection cars)

LH rear

Series II from engine no. 7P25001 - Series III (fuel injection cars)

RH front

Series II from engine no. 7P25001 - Series III (fuel injection cars)

LH front

Series II from engine no. 7P25001 - Series III (fuel injection cars)

between manifold and down pipe

Series II from engine no. 7P25001 - Series III (fuel injection cars)

manifold to head

Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)

Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)

Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)

manifold to head

Series III from engine no. 7P47587 (characteristic: metric thread)

Series III from engine no. 7P47587 (characteristic: metric thread)

Series III from engine no. 7P47587 (characteristic: metric thread)

manifold to head - with oversize

Allows to re-tap a damaged thread in the manifold

7/16" x 20 UNF - contents: • 1 HSSG standard drill • 1 HSSG hand tap • 1 inserting tool • 1 tang break tool • 10 wire thread inserts "free running", stainless steel (ASIS 304), lenght: 1,5 x D

Content: finishing tap, tang break off tool, pre-wound inserting tool, instructions and 10 thread inserts. Comes in a durable carrying case