Zenith Stromberg 175CD internal carburettor
diaphragm
Series I to engine no. 7L42594
Requires: 2
diaphragm
Series I from engine no. 7L42595, Series II
Requires: 2
diaphragm - plastic
Series I from engine no. 7L42595, Series II
Requires: 2
for carburettor with fixed needle
Series I to engine no. 7L10076
Requires: 2
for carburettor with spring loaded needle
Series I from engine no. 7L10077, Series II
Requires: 2
fixed type - marked: BIAE
Series I to engine no. 7L10076
Requires: 2
spring loaded type - marked: B1AR
Series I from engine no. 7L10077 to 7L42594
Requires: 2
spring loaded type - marked: B1CG
Series II to engine no. 7L92806
Requires: 2
spring loaded type - marked: B2AZ
Series II from engine no. 7L92807 to 8L14790
Requires: 2
spring loaded type - marked: B2BC
Series II from engine no. 8L14791
Requires: 2
idle mixture
Series I from engine no. 7L10077, Series II
Requires: 2
Series I from engine no. 7L10077, Series II
Requires: 2
- marked: B1BT
Series I from engine no. 7L42595
Requires: 2
in suction chamber
Series II from engine no. 8L14791 to 8L22290
Requires: 1
in suction chamber
Series II from engine no. 8L22291
Requires: 2
choke cable
Series I, Series II to engine no. 8L14790
Requires: 2
throttle stop
Series I, Series II to engine no. 8L14790
Requires: 2
throttle disc retaining on Zenith Stromberg carburettors
Requires: 4
rear carburettor
Series I, Series II to engine no. 8L14790
Requires: 1
front carburettor
Series I, Series II to engine no. 8L14790
Requires: 1
rear carburettor
Series II from engine no. 8L14791
Requires: 1
front carburettor
Series II from engine no. 8L14791
Requires: 1
throttle spindle
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
with oval slot
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 2
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle stop lever
Rear carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle spindle
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle spindle - stainless steel
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle stop lever
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
for cam
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 2
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
with oval slot
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle spindle
Front carburettor - Series I, Series II to engine no. 8L14790
Requires: 1
throttle spindle
Rear carburettor - Series II from engine no. 8L14791
Requires: 1
throttle spindle - stainless steel
Rear carburettor - Series II from engine no. 8L14791
Requires: 1
throttle spindle
Rear carburettor - Series II from engine no. 8L14791
Requires: 1
throttle spindle
Front carburettor - Series II from engine no. 8L14791
Requires: 1
throttle spindle - stainless steel
Front carburettor - Series II from engine no. 8L14791
Requires: 1
Series II from engine no. 8L14791
Requires: 2
throttle stop lever
Series II from engine no. 8L14791
Requires: 2
throttle spindle. For bodies with worn cast in bushes, useable on Zenith Stromberg carburettors with 7 mm throttle spindle
Series II from engine no. 8L14791
Requires: 4
Series II from engine no. 8L14791
Requires: 2
throttle spindle
Series II from engine no. 8L14791
Requires: 2
front and rear carburettor
Series II to engine no. 8L14790
Requires: 2
automatic choke
Series II from engine no. 8L14791
Requires: 2
automatic choke
Series II from engine no. 8L14791
Requires: 2
automatic choke
Series II from engine no. 8L14791
Requires: 2
for retaining ring
Series II from engine no. 8L14791
Requires: 6
on cover
Series II from engine no. 8L14791
Requires: 2
long - retaining housing
Series II from engine no. 8L14791
Requires: 4
short - retaining housing
Series II from engine no. 8L14791
Requires: 2
for Zenith Stromberg 175CD carburettors - bore: 2.25 mm
Series I from engine no. 7L42595
Requires: 2
for Zenith Stromberg 175CD carburettors - bore: 2.00 mm
Series II to engine no. 8L14790
Requires: 2
for Zenith Stromberg carburettors - superior replacement of needle valve and seat
Requires: 2
for Zenith Stromberg 175CD carburettors - diameter: 0.100"
Requires: 2
for Zenith Stromberg carburettor - unsinkable float made of nitrile rubber
Requires: 2
float chamber on Zenith Stromberg carburettors - made of plastic with brass cap and 'O' ring
Requires: 2
complete with cover
Series I to engine no. 7L10076
Requires: 2
complete with cover
Series I from engine no. 7L10077, Series II to engine no. 7L92806
Requires: 2
complete with cover
Series II from engine no. 7L92807 to 8L14790
Requires: 2
complete with cover
Series II from engine no. 8L14791
Requires: 2
services one Zenith Stromberg 175CD carburettor
Requires: 2
for one Zenith Stromberg 175CD carburettor
Requires: 2
for one Zenith Stromberg 175CD carburettor with manual choke - variant with 2.25 mm float needle valve
Requires: 2
for one Zenith Stromberg 175CD carburettor with manual choke - variant with 1.75 mm float needle valve
Requires: 2
services front (LH) Zenith Stromberg 175CD carburettor - feature: throttle spindle with threads on both ends. Comprising service kit 319155 plus throttle disc and throttle spindle
Requires: 1
services rear (RH) Zenith Stromberg 175CD carburettor. Characteristic: throttle spindle with thread on one end only. Comprising service kit 319155 plus throttle disc and throttle spindle
Requires: 1
