Distributor and ignition coil - Series I and II with Lucas 22D6 distributors and Zenith Stromberg carburettors ( to December 1974)
exchange - serial number: unknown
4.2 Series I to engine no. 7L10076
Requires: 1
exchange - serial number: unknown
4.2 Series I from engine no. 7L10077 to 7L28278
Requires: 1
exchange - serial number: unknown
4.2 Series I from engine no. 7L28278 to 7L42594
Requires: 1
exchange - serial number: unknown
4.2 Series I from engine no. 7L42595 to 7L60433
Requires: 1
exchange - serial number: unknown
4.2 Series I from engine no. 7L60434 and all 4.2 Series II
Requires: 1
HT lead to distributor cap
4.2 Series I to engine no. 7L28278
Requires: 7
on acorn nut
4.2 Series I to engine no. 7L28278
Requires: 7
for Lucas 22D6 top entry distributor. Identified by acorn nuts to fix ignition leads and side gap
4.2 Series I to engine no. 7L28278
Requires: 1
for Lucas 22D6 and 25D6 top entry distributor. Identified by push fit ignition leads
XJ6 4.2 Series I from engine no. 7L28279 (1971-73) plus XJ6 4.2 Series II to engine no. 8L16710 (1973-75)
Requires: 1
for Lucas 22D6 and 25D6 top entry distributor. Identified by push fit ignition leads
XJ6 4.2 Series I from engine no. 7L28279 (1971-73) plus XJ6 4.2 Series II to engine no. 8L16710 (1973-75)
Requires: 1
with spring - inside Lucas 22D and 25D distributor cap
Requires: 1
speed limiter type for Lucas 22D6 distributor
4.2 Series I to engine no. 7L56521
Requires: 1
non speed limiter type for Lucas 22D6 distributor
4.2 Series I to engine no. 7L56521
Requires: 1
for Lucas 22D6 distributors
4.2 Series I from engine no. 7L56522 and all 4.2 Series II
Requires: 1
improved version for Lucas 22D6, 25D6, DMBZ6 and DVX6A distributors. Please note: distributor rotation anti-clockwise
4.2 Series I from engine no. 7L56522 and all 4.2 Series II
Requires: 1
for Lucas distributors. Variant with lucar terminal. Please note: downward pointing connector
Requires: 1
for Lucas DM2, DM2P4, 22D, 23D and 25D distributor - one-piece type for distributors with a 3 mm long peg on base plate
Requires: 1
4.2 Series I to engine no. 7L10076
Requires: 1
4.2 Series I from engine no. 7L10077 to 7L42594
Requires: 1
4.2 Series I from engine no. 7L42595 and all 4.2 Series II
Requires: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
6RA type
Requires: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Requires: 1
90° angled - plastic reproduction with Champion lettering
4.2 Series I to engine no. 7L35132
Requires: 6
- modern rubber type
4.2 Series I to engine no. 7L35132
Requires: 6
in black, for Lucas DMBZ6A and 22D6 distributors. Identified by acorn nuts to fix ignition leads
4.2 Series I to engine no. 7L35132
Requires: 1
for ignition lead bracket
4.2 Series I to engine no. 7L35132
Requires: 1
4.2 Series I to engine no. 7L35132
Requires: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads. HT lead set with 8 mm silicone jacket in black
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 1
made in red vulcanised fibreboard with the correct rivets and brackets
4.2 to engine no. 7L71526
Requires: 6
with push-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type
4.2 Series I to engine no. 7L35132
Requires: 1
with push-in HT lead terminal and approx. 1.4 Ohm primary resistance. Ballasted type
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 1
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 2
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 2
for ballasted ignition coil. 1.6 Ohm
4.2 Series I from engine no. 7L35133 and all 4.2 Series II
Requires: 1
ignition coil
4.2 Series II
Requires: 1
4.2 Series II
Requires: 2
ignition coil
4.2 Series II
Requires: 2
Optronic - for Lucas and Mallory distributors
Requires: 1
