Cylinder head - 4.2 engine
on rocker cover with golden 'Jaguar' letters on black surface. Dimensions: 95 x 38 mm
Requires: 2
on rocker cover with golden 'Jaguar' domed acrylic letters on black surface. Dimensions: 95 x 38 mm
Requires: 2
on rocker cover with golden 'Daimler' letters on black surface. Dimensions: 95 x 38 mm
Requires: 2
made in red vulcanised fibreboard with the correct rivets and brackets
Requires: 6
90° angled - plastic reproduction with Champion lettering
Requires: 6
Series I and II: carburettor cars
- alternatives
Requires: 6
Series I and II: carburettor cars
- alternatives
Requires: 6
Series II: all fuel injection cars
- alternatives
Requires: 6
Series II: all fuel injection cars
- alternatives
Requires: 6
Series III: fuel injection cars for USA, Canada, Japan and Sweden
- alternatives
Requires: 6
Series III: fuel injection cars for USA, Canada, Japan and Sweden
- alternatives
Requires: 6
Series II: fuel injection cars for all other countries
- alternatives
Requires: 6
Series II: fuel injection cars for all other countries
- alternatives
Requires: 6
LH - ripped variant. Used item
To engine no. 8L9080
Requires: 1
To engine no. 7L96757
Requires: 1
LH - spilt type
To engine no. 8L9080
Requires: 1
LH - solid type
From engine no. 8L9081
Requires: 1
modern high tech version with solid rear section
From engine no. 8L9081
Requires: 1
RH - ripped variant. Used item
To engine no. 8L9080
Requires: 1
chromed. Securing rocker covers and cylinder head
Series I and II.
Contents illustrations 17, 18, 53, 54, 55, 66 and 67
Requires: 1
chromed. Securing rocker covers and cylinder head
Series III.
Contents illustrations 17, 18, 53, 54, 55, 66 and 67
Requires: 1
securing rocker cover
Series II and III
Requires: 2
RH - spilt type
To engine no. 8L9080
Requires: 1
RH - solid type
From engine no. 8L9081
Requires: 1
256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible
Requires: 1
long skirt version with 1.3/8" original diameter and 1" total height
Requires: 12
with 1.3/8" original diameter and 7/8" total height
Requires: 12
aftermarket with 1.3/8" original diameter and 7/8" total height
Requires: 12
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
Requires: 1
top, for inlet valve and exhaust valve - aftermarket
Requires: 12
44.5 mm
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
Requires: 6
44.5 mm - reproduction
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
Requires: 6
made from 214N stainless steel. Head diameter: 47.7 mm
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476
Requires: 6
made from 214N stainless steel - reproduction with 47.7 mm head diameter
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476
Requires: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Requires: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Requires: 6
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Requires: 6
inlet valve +0.003" (1st oversize). Steel type
Requires: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Requires: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Bronze type for lead free applications
Requires: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Requires: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Requires: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Bronze type for lead free applications
Requires: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Requires: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Requires: 6
cam follower - diameter: 41.75 mm
Alternatives
Requires: 12
cam follower - diameter: 41.75 mm. Reproduction
Alternatives
Requires: 12
exhaust manifold - length: 1.5/8"
Series I and II.
Stainless steel, may replace original stud
Requires: 14
exhaust manifold - length: 1.5/8"
Series I and II.
Stainless steel, may replace original stud
Requires: 2
exhaust manifold - length: 1.5/8"
Series III.
Stainless steel, may replace original stud
Requires: 16
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
Requires: 9
7/16" - galvanised 2.3 mm thick washer for cylinder head dome nut
Series I
Requires: 5
7/16" - chromed 3 mm thick washer for cylinder head dome nut
Series I
- alternative to 207030
Requires: 5
cylinder head - galvanized
Series II and III
Requires: 5
rear crankshaft cover to cylinder block - diameter: 5/16"
Requires: 16
engine breather
Series I Carburettor models with carbon canister
Requires: 1
engine breather at cylinder head - reproduction made of PA11 plastic using the SLS process
Series I Carburettor models without carbon canister and alls Series II Carburettor models
Requires: 1
engine breather at cylinder head - used item
Series I Carburettor models without carbon canister and alls Series II Carburettor models
Requires: 1
engine breather
Series II and III - fuel injection cars
Requires: 1
block to cylinder head
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Requires: 1
oil feed pipe to block
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Requires: 3
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Requires: 6
block to cylinder head
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Requires: 1
oil feed pipe to block
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Requires: 2
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Requires: 4
block to cylinder head
Series II without oil cooler from engine no. 8L28179 to 8L50475
Requires: 1
oil feed pipe to block
Series II without oil cooler from engine no. 8L28179 to 8L50475
Requires: 2
Series II without oil cooler from engine no. 8L28179 to 8L50475
Requires: 4
block to cylinder head
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Requires: 1
oil feed pipe to block
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Requires: 2
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Requires: 4
block to cylinder head
Fuel injection cars only: Series III from engine no. 8L102221
Requires: 1
block to cylinder head - uprated steel braided variant to eradicatethe common leak on 6-cylinder engines
XJ6 4.2 Series II from engine no. 8L50476 and all 4.2 Series III (fuel injection models)
Requires: 1
oil feed pipe to block
Fuel injection cars only: Series III from engine no. 8L102221
Requires: 2
Fuel injection cars only: Series III from engine no. 8L102221
Requires: 4
oil feed pipe to block
Repair bolt - 1.1/4" long
Requires: 1
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
For lead free applications
Requires: 6
inlet, hardened
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476.
For lead free applications
Requires: 6
exhaust, hardened
For lead free applications
Requires: 6
inlet manifold - length: 1.5/8"
Carburettor cars.
Stainless steel, may replace original stud
Requires: 2
inlet manifold - length: 1.5/8"
Carburettor cars.
Stainless steel, may replace original stud
Requires: 16
inlet manifold - length: 1.5/8"
Fuel injection cars
Requires: 18
inlet manifold - length: 1.5/8"
Fuel injection cars.
Stainless steel, may replace original stud
Requires: 18
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series I, Series II to engine no. 8L9080
Requires: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series II from engine no. 8L9081 plus Series III except models for Germany and Switzerland
Requires: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series III from engine no. 8L209816: models for Germany and Switzerland with air injection only
Requires: 1
reproduction
To engine no. 7L1175
Requires: 1
with Payen head gasket
From engine no. 7L7116 to 8L9080
Requires: 1
with head gasket made from high quality composite material. Bore size: 93.30 mm + 0.5 mm, thickness: 0.64", built in thickness: 0.61"
from engine no. 7L1176 to 8L9080 (1970-74)
Requires: 1
aftermarket
From engine no. 7L7116 to 8L9080
Requires: 1
Series II from engine no. 8L9081
Requires: 1
aftermarket
Series II from engine no. 8L9081
Requires: 1
