Automatic gearbox Borg Warner model 12 - outer
exchange, including torque converter
Identification code: AS2-12J (red plate)
Requires: 1
with breather
To engine no. 7L48411
Requires: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", cotton braided
From engine no. 7L48412
Requires: 1
breather hose to gearbox
From engine no. 7L48412
Requires: 1
oil filler tube
Requires: 1
Requires: 1
gearbox to oil cooler
Requires: 2
oil pipe
Requires: 1
oil pipe
Requires: 1
oil pipe
Requires: 2
oil pipe
Requires: 2
torque converter
To engine no. 7L45560
Requires: 1
From engine no. 7L45561
Requires: 1
converter housing, bottom
Requires: 1
converter housing, front
Requires: 1
From engine no. 7L45561
Requires: 1
If not available use oil seal and O-ring set 201659
Requires: 1
oil pipe
Requires: 1
rear brake band
Requires: 1
Requires: 1
front pump to casing
If not available use oil seal and O-ring set 201659
Requires: 1
- front
Requires: 1
between front and middle gearbox casing
If not available use gasket set 201966
Requires: 1
securing cover plate
Requires: 2
sealing governor inspection aperture
Requires: 1
cover plate
If not available use gasket set 201966
Requires: 1
- middle
Requires: 1
Requires: 2
Requires: 1
- rear extension
Requires: 1
If not available use oil seal and O-ring set 201659
Requires: 1
Requires: 1
with 15 teeth - for vehicles with BW12 automatic transmission
Requires: 1
Requires: 1
for pressure test
Requires: 1
Requires: 1
retaining lever to shaft
Requires: 1
Requires: 1
torsion lever
Requires: 1
Requires: 1
Requires: 1
Requires: 1
with spring
Requires: 1
Requires: 1
Requires: 1
Requires: 1
retaining toggle pin
Requires: 1
toggle link
Requires: 1
Requires: 1
toggle lever
Requires: 1
for BW12 automatic transmission - used item
Requires: 1
for BW12 automatic transmission. Uprated aluminium version
Requires: 1
for BW8 and BW12 automatic tranmissions
If not available use gasket set 201966
Requires: 1
for BW8 and BW12 automatic tranmissions. Uprated Duraprene variant
Requires: 1
separately
Requires: 1
If not available use oil seal and O-ring set 201659
Requires: 1
Requires: 1
vacuum pipe
Requires: 1
retaining clamp plate to vacuum pipe
Requires: 1
Requires: 1
Requires: 1
Requires: 1
TQF
Requires: 10
Hightec ATF 4000
