Crankshaft - 3.6 litre 6 cylinder models
double row
Requires: 1
on crankshaft
XJS 3.6 litre to VIN...139051
Requires: 1
on crankshaft
XJS 3.6 litre from VIN...139052
Requires: 1
crankshaft - new item
XJS 3.6 litre with 80 ampere alternator to to engine no. 109969 (1982-87)
Requires: 1
crankshaft
Requires: 1
crankshaft, length: 11/16" - manual transmission
Requires: 1
- manual transmission
Requires: 1
flywheel to crankshaft - manual transmission
Requires: 8
crankshaft to fly wheel - automatic transmission
XJS 3.6 litre to engine no. 139065
Requires: 1
crankshaft to fly wheel - automatic transmission
XJS 3.6 litre from engine no. 139066
Requires: 1
crankshaft to fly wheel - automatic transmission
XJS 3.6 litre to engine no. 139065
Requires: 8
crankshaft to fly wheel - automatic transmission
XJS 3.6 litre from engine no. 139066
Requires: 8
standard size - shaft diameter: 2.086"
Requires: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2.086"
Requires: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2.086"
Requires: 1
standard size - shaft diameter: 3.0007"
Requires: 1
with +0.010" oversize - shaft diameter of the standard bearing: 3.0007"
Requires: 1
with +0.020" oversize - shaft diameter of the standard bearing: 3.0007"
Requires: 1
Requires: 1
standard size - 3-ring piston with 91 mm standard bore size: 91mm and 9.6:1 compression ratio
XJS 3.6 to engine no. 103704 (1982-85)
Requires: 1
+0.020" oversize - 3-ring piston with 91 mm standard bore size: 91mm and 9.6:1 compression ratio
XJS 3.6 litre to engine no. 103704
Requires: 1
Standard size - bore size: 91mm, 3-ring piston, compression: 9.6:1
XJS 3.6 litre from engine no. 103705
Requires: 6
Standard size - bore size: 91mm, 3-ring piston, compression: 9.6:1
XJS 3.6 litre from engine no. 103705
Requires: 6
standard size - 3-ring piston with 91 mm bore size: 91mm and 9.6:1 compression ratio
XJS 3.6 to engine no. 103704 (1982-85)
Requires: 1
+0.020" oversize - 3-ring piston with 91 mm standard bore size: 91mm and 9.6:1 compression ratio
XJS 3.6 to engine no. 103704 (1982-85)
Requires: 1
Standard size - bore size: 91mm, 3-ring piston, compression: 9.6:1
XJS 3.6 litre from engine no. 103705
Requires: 6
0.020 oversize - bore size: 91mm, 3-ring piston, compression: 9.6:1
XJS 3.6 litre from engine no. 103705
Requires: 6
XJS 3.6 litre to engine no. 102538
Requires: 1
auxiliary shaft
XJS 3.6 litre from engine no. 102539
Requires: 1
auxiliary shaft
XJS 3.6 litre from engine no. 102539
Requires: 2
auxiliary shaft
XJS 3.6 litre from engine no. 102539
Requires: 1
auxiliary shaft
Requires: 1
auxiliary shaft
Requires: 1
lower (primary) timing chain - upper damper
Requires: 1
lower (primary) timing chain - lateral damper
Requires: 1
retaining timing chain damper- lateral damper
Requires: 2
timing chain tensioner - lower (primary) timing chain
Requires: 1
sliding rail timing chain tensioner - lower (primary) timing chain
Requires: 1
sliding rail timing chain tensioner - lower (primary) timing chain
Requires: 2
sliding rail timing chain tensioner - lower (primary) timing chain
Requires: 1
sliding rail timing chain tensioner - lower (primary) timing chain
Requires: 2
timing chain tensioner - lower (primary) timing chain
Requires: 1
retaining housing timing chain tensioner. Identify by: 45mm lenght
Requires: 1
retaining housing timing chain tensioner. Identify by: 30mm lenght
Requires: 1
timing chain tensioner - lower (primary) timing chain
Requires: 1
timing chain tensioner - lower (primary) timing chain
Requires: 1
timing chain tensioner - lower (primary) timing chain
Requires: 1
complete - lower (primary) timing chain
Requires: 1
double row - variant for separate plate for timing adjustment
Requires: 2
with shaft, upper (secundary)
Requires: 1
upper (secondary) timing chain - lateral damper
Requires: 1
retaining spacer block. Identify by: 35mm length
Requires: 1
retaining timing chain damper. Identify by: 50mm length
Requires: 1
retaining timing chain damper. Identify by: 25mm length
Requires: 1
upper (secondary) timing chain - upper damper
Requires: 1
retaining upperr timing chain damper. Identify by: 16mm length
Requires: 2
timing chain tensioner - upper (secondary) timing chain
Requires: 1
retaining bracket sliding rail. Identify by: 70mm lenght
Requires: 2
complete - lower (primary) timing chain
Requires: 1
timing chain tensioner - lower (primary) timing chain
Requires: 1
timing chain tensioner - lower (primary) timing chain
Requires: 2
chain tensioner
Requires: 1
retaining housing chain tensioner. Identify by: 25mm length
Requires: 1
retaining housing chain tensioner. Identify by: 30mm length
Requires: 1
