GKN Differential
exchange - ratio: 3.31:1 (13:43 teeth) - "powr-lok" type
Requires: 1
exchange - ratio: 3.06:1 (17:52 teeth) - "powr-lok" type
Requires: 1
exchange - ratio: 3.07:1 (14:43 teeth) - "powr-lok" type
Requires: 1
"powr-lok" type with 2.88:1 (17:49 teeth) ratio - reconditioned, in exchange
Requires: 1
differential
Requires: 1
differential to rear suspension crossmember
XJS with GKN differential to VIN...139051
Requires: 4
XJS with GKN differential to VIN...139051
Supplied per metre
Requires: 2
XJS with GKN differential to VIN...139051
Requires: 4
bearing cap to differential casing
XJS with GKN differential to VIN...139051
Requires: 4
oil drain
XJS with GKN differential to VIN...139051
Requires: 1
differential
XJS with GKN differential to VIN...139051
Requires: 1
differential casing - made from sheet steel
XJS with GKN differential to VIN...139051
Requires: 1
breather
XJS with GKN differential to VIN...139051
Requires: 1
oil filler
XJS with GKN differential to VIN...139051
Requires: 1
securing differential cover
XJS with GKN differential to VIN...139051
Requires: 10
securing differential cover
XJS with GKN differential to VIN...139051
Requires: 10
differential casing - made from aluminium
XJS with GKN differential from VIN...139052
Requires: 1
bearing cap to differential casing
XJS with GKN differential from VIN...139052
Requires: 4
bearing cap to differential casing
XJS with GKN differential from VIN...139052
Requires: 4
differential to rear suspension crossmember
XJS with GKN differential from VIN...139052
Requires: 4
supplied per metre
XJS with GKN differential from VIN...139052
Requires: 2
magnetic
XJS with GKN differential from VIN...139052
Requires: 2
differential
XJS with GKN differential from VIN...139052
Requires: 1
differential breather
XJS with GKN differential from VIN...139052
Requires: 1
oil filler
XJS with GKN differential from VIN...139052
Requires: 1
securing differential cover
XJS with GKN differential from VIN...139052
Requires: 10
securing differential cover
XJS with GKN differential from VIN...139052
Requires: 10
breather
XJS with GKN differential from VIN...139052
Requires: 1
propshaft to differential - variant for oil seal with 46 mm inner diameter
Requires oil seal 201811
Requires: 1
propshaft to differential - please note: this flange is needed thor the crown wheel and pingion 208206 and 208207 to suit an outside diameter 2.6875" (68.263 mm)
Requires oil seal 201811
Requires: 1
differential pinion - rubber type with 46 mm inner diameter
Requires: 1
differential pinion, outer - please note: this bearing is needed thor the crown wheel and pingion 208206 and 208207 to suit an outside diameter 2.6875" (68.263 mm)
Requires: 1
inner pinion bearing - 0.003"
XJS with GKN differential to VIN...139051
inner pinion bearing - 0.005"
XJS with GKN differential to VIN...139051
inner pinion bearing - 0.010"
XJS with GKN differential to VIN...139051
rear pinion bearing - 0.508 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.533 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.559 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.584 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.609 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.737 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.660 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.686 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.711 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.737 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.762 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.787 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.813 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.838 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.864 mm
XJS with GKN differential from VIN...139052
Requires: 2
rear pinion bearing - 0.889 mm
XJS with GKN differential from VIN...139052
Requires: 2
4.55:1 (11/50 teeth)
Requires: 1
3.54:1 (13/46 teeth) - vaiant for type 1 differential
Requires: 1
3.31:1 ratio (teeth: 13/43) - vaiant for type 2 differential
Requires: 1
3.07:1 ratio (teeth: 43/14) - variant for type 2 differential
Requires: 1
2.88:1 ratio (teeth: 17/49) - vaiant for type 2 differential
Requires: 1
crown wheel and pinion - 0.003"
XJS with GKN differential to VIN...139051
crown wheel and pinion - 0.005"
XJS with GKN differential to VIN...139051
crown wheel and pinion - 0.010"
XJS with GKN differential to VIN...139051
crown wheel and pinion - 0.030"
XJS with GKN differential to VIN...139051
differential carrier - 0,028 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,030 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,031 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,032 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,033 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,034 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,035 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,036 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,037 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,038 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,039 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,040 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier - 0,045 mm
XJS with GKN differential from VIN...139052
Requires: 2
differential carrier (inner bearing)
Requires: 2
differential carrier (inner bearing)
Requires: 2
half shaft - rubber lip seal with steel casing, 2.11/16" outer diameter and 3/8" total height
Requires: 2
half shaft - rubber lip seal with steel casing, 2.11/16" outer diameter and 3/8" total height
Requires: 2
brake caliper to bearing housing
Requires: 10
RH - new item
Fits to all models
Requires: 1
suitable for 3,07:1, 3.31:1 and 3.54:1 ratios - reconditioned, in exchange
Requires: 1
Transmax limited slip Z 85W-90 - hypoid oil for vehicles with limited slip differential
Requires: 3
Limslip 85W-140 - hypoid oil for vehicles with limited slip differential
Requires: 3
output side - for GKN powr-lok differential
Requires: 1
on differential, for electronic speedometer
XJS 5.3 V12 from VIN...144263 (1987-91) plus 3.6 from VIN...144700 (1987-91)
Requires: 1
on differential, for electronic speedometer
XJS 5.3 V12 from VIN...144263 (1987-91) plus 3.6 from VIN...144700 (1987-91)
Requires: 1