SU-H6 internal carburettor - XK120 from January 1952
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Requires: 1
with piston
Requires: 2
fixed type. For standard mixture - marked: RG
Our recommendation
Requires: 2
fixed type. For standard mixture - marked: WO2
Requires: 2
fixed type. For standard mixture - marked: RF
Requires: 2
front carburettor
Requires: 1
rear carburettor
Requires: 1
for 5/16" throttle spindles with standard size.
Length: 115 mm
Requires: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Requires: 4
throttle disc
Fixed to the cover band of the starter motor
Requires: 2
Coupling link to throttle spindle and carburettor spindle
Requires: 2
Coupling link to throttle spindle and carburettor spindle
Requires: 2
Coupling link to throttle spindle and carburettor spindle
Requires: 2
with treated rubber seals - for SU-H type carburettors with fixed needle
Requires: 1
carburettor. Copy with 2.3/8" diameter
Please use with float lever 3141
Requires: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 40)
Requires: 2
float on SU carburettors - height: 1/4". Fits to the original float chamber lid only
Fits to the original float chamber lid only
Requires: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Requires: 2
and spring - inside float chamber lid on SU carburettors
Requires: 2
float chamber and cast pipe to front carburettor
Requires: 1
banjo bolt and float chamber to carburettor body
Requires: 1
banjo bolt to cast pipe
Requires: 1
banjo bolt and cast pipe to thermo carburettor
Requires: 1
for single carburettor
Comprising service kit 200202 (ill. 57) plus throttle disc and throttle spindle
Requires: 2
