Dynamo
C45/NV type with mechanical tacho drive. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm: reconditioned, in exchange
TA (1936-39)
Requires: 1
C45/YV type with mechanical tacho drive. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm. Reconditioned, in exchange
TB and TC (1939-49)
Requires: 1
Lucas C40 type with mechanical tacho drive - reconditioned, in exchange
TD and TF (1949-55)
Requires: 1
tachometer cable to dynamo. Reproduction with square drive instead of screw and sleeve
TA (1936-39)
Requires: 1
for tachometer reduction box on dynamo
TA, TB, TC, TD and TF (1936-55)
Requires: 1
with fan - for Lucas C45/YV dynamo
TB and TC (1939-49)
Requires: 1
für C39 dynamo - fits to 15 mm shaft
TD and TF (1949-55)
Requires: 1
for C40 and C42 dynamo - fits to 15 mm shaft
TD and TF (1949-55)
Requires: 1
retaining pulley
TA, TB, TC, TD and TF (1936-55)
Requires: 1
retaining pulley
TA, TB, TC, TD and TF (1936-55)
Requires: 1
commutator end bracket - C45 dynamo
TA, TB and TC (1936-49)
Requires: 1
commutator end bracket - C39 and C40 dynamo
TD and TF (1949-55)
Requires: 1
for C45 alternator with three brushes
TA and TB (1936-39)
Requires: 1
for C45 alternator with two brushes
TC (1945-49)
Requires: 1
for Lucas C39 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick
TD and TF (1949-55)
Requires: 1
for C45 alternator with two brushes
TC, TD and TF (1945-55)
Requires: 1
dynamo to cylinder block
TB, TC, TD und TF (1939-55)
Requires: 1
adjusting link to dynamo
TB, TC, TD und TF (1939-55)
Requires: 1
retaining dynamo
TB, TC, TD und TF (1939-55)
Requires: 2
retaining dynamo
TB, TC, TD und TF (1939-55)
Requires: 1
dynamo. RF95 type with 9 screw-in terminals and two 35 ampere fuses
TC (1945-49), TD to chassis no. 8141 (1949-51)
Requires: 1
for C39 and C40 dynamo. RB106 type with 5 screw-in terminals
TD from chassis no. 8142 (1951-53) and all TF (1953-55)
Requires: 1
conversion kit C40 for positive earthed cars. Variant with mechanical tacho drive. Capacity: 40 Ampere, shaft diameter: 15 mm, PCD of fixing holes: 144 mm, Distance between mounting brackets (at the holes): 144 mm
TD and TF (1949-55)
Requires: 1
conversion kit C40 for negative earthed cars. Variant with mechanical tacho drive. Capacity: 40 Amps. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 144 mm, Distance between mounting brackets (at the holes): 144 mm
TD and TF (1949-55)
Requires: 1
