SU-HS4 internal carburettor
fixed - no. 5 - standard
AUD135 carburettors
Requires: 2
fixed - FX - standard
AUD278 and AUD325 carburettors
Requires: 2
fixed - no. 5 - rich
AUD278 and AUD325 carburettors
Requires: 2
fixed - GZ - weak
AUD278 and AUD325 carburettors
Requires: 2
biased - AAE
AUD326 and AUD405 carburettors
Requires: 2
front carburettor
Requires: 1
rear carburettor
Requires: 1
for carburettor piston at SU-HS4 carburettors
Requires: 2
with spring - for carburettor piston at SU-HS4 carburettors
Requires: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Requires: 2
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Requires: 2
rear carburettor - Diameter: 0.090". Identification: green marking sleeve
Requires: 1
assembly. For SU-HS carburettors with fixed metering needle
AUD52, AUD135, AUD278 and AUD325 carburettors
Requires: 2
assembly. SU-HS carburettors with spring loaded needle, variant with fine threat
AUD326, AUD405, AUD465 and AUD492 carburettors
Requires: 2
separately
AUD52, AUD135, AUD278 and AUD325 carburettors
Requires: 2
separately
AUD326, AUD405, AUD465 and AUD492 carburettors
Requires: 2
throttle spindle on front and rear carburettor - stainless steel reproduction
Requires: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Requires: 4
float chamber mounting
AUD52, AUD135, AUD278 and AUD325 carburettors
Requires: 2
float chamber mounting
AUD326, AUD405, AUD465 and AUD492 carburettors
Requires: 2
for two SU-HS4 type carburettors. Comprising service kit 200208 plus throttle discs and throttle spindles
Requires: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Requires: 1
