Crankshaft - V8 engine
new item
8.5:1, 8.25:1 and 8.13:1 compression engines
Requires: 1
suitable for steel and alumium rockers
Requires: 16
standard size - supplied in 5 piece kits
Requires: 1
standard, compression ratio: 8.25:1, 3-ring piston
Requires: 1
+0.020", compression ratio: 8.25:1, 3-ring piston
Requires: 1
+0.040", compression ratio: 8.25:1, 3-ring piston
Requires: 1
standard, compression ratio: 8.25:1, 3-ring piston
Requires: 8
+0.020", compression ratio: 8.25:1, 3-ring piston
Requires: 8
+0.040", compression ratio: 8.25:1, 3-ring piston
Requires: 8
standard size. Fits to 3 ring pistons with 2 compression rings with 0.078" and 1 oil ring with 0.187"
Requires: 1
standard size. Fits to 3 ring pistons with 2 compression rings with 0.0625" and 1 oil ring with 0.187"
Requires: 1
+0.020" oversize. Fits to 3 ring pistons with 2 compression rings with 0.078" and 1 oil ring with 0.187"
Requires: 1
+0.020" oversize. Fits to 3 ring pistons with 2 compression rings with 0.0625" and 1 oil ring with 0.187"
Requires: 1
+0.040" oversize. Fits to 3 ring pistons with 2 compression rings with 0.078" and 1 oil ring with 0.187"
Requires: 1
+0.040" oversize. Fits to 3 ring pistons with 2 compression rings with 0.0625" and 1 oil ring with 0.187"
Requires: 1
for 3.9 liter conversion - sizes: 94.00 x 97.933 x 141.732 mms
Requires: 8
with standard size - shaft diameter: 2"
Requires: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2"
Requires: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2"
Requires: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2"
Requires: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2"
Requires: 1
damper pulley to crankshaft
Requires: 1
crankshaft, with damper
Requires: 1
Requires: 1
crankshaft. Length: 1.1/16" - outer diameter: 15/16" - inner diameter: 19,1". Fits into crankshaft
Requires: 1
with standard size - shaft diameter: 2.2992"
Requires: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2.2992"
Requires: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2.2992"
Requires: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2.2992"
Requires: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2.2992"
Requires: 1
Classic Light 20W-60
Requires: 1
SAE 15W-40
You take the exact filling amounts and intended purposes from the manufacturer's information.
Requires: 1
Content: 5 l ($7.06 / 1 l)
