Penrite Running in oil
SAE 15W-40
Running In Oil has a High Zinc formulation to protect the valve train including camshafts, followers, rockers and pushrods. It allows the piston rings to bed in correctly with the cylinder walls, preventing glazing of the bores and it can be used for both dynamometer and normal road run in procedures. If used for running in on road, the suggested running in period for Running In Oil is approximately 500 Kilometres after which both the oil and filter should be changed.
Running In Oil may be used in engines where SAE 15W-40, 20W-40, 20W-50 & SAE 30 viscosity grades are specified by the manufacturer. It is designed to be used over a wide range of engine oil viscosities. Its viscosity allows for use in both new and older type engines.
| Range: | Multigrade oil |
|---|---|
| Base oil: | mineral oil |
| Manufacturer's product name: | Running In |
| Specifications and manufacturer approvals: | API-SF/CC |
| Type of oil: |
|
| Range of use: | Running-in oils, storage oils and flushing oils |
| Oil viscosity: | 15W-40 |
| Oil - Fuel: |
|
| Vehicle type: |
|
| Oil replaces viscosity: |
|
| Filling amount: | 5 litre |
Login
Over 300,000 articles available from stock!
For orders up to 10 p.m., we send 96.3% of all items still on the same day.
50 years of experience with parts for classic cars and accessories.