Inner body repair panels, rear section - MK4 and 1500
for floor panel stiffener plate
Requires: 2
for anchoring handbrake lever
Welded to propshaft tunnel
Requires: 1
propshaft tunnel
1500
Requires: 1
radius arm - must be weldede to the heelboard panel
Requires: 2
LH rear
Requires: 1
RH rear
Requires: 1
for seat belt mounting - supplied in pairs. Must be welded to the body (e.g. to the inner wheel arch). Size: 55 x 55 mm x 2 mm thickness with 7/16" UNF thread welded nut
Welded to inner wheel arch
Requires: 1
rear
Requires: 1
leaf spring access
Requires: 1
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
Requires: 2
rear floor panel to chassis, LH side
Requires: 1
rear floor panel to chassis, RH side
Requires: 1
wheel arch to decking panel
Requires: 2
fuel tank, LH side
Requires: 1
fuel tank, RH side
Requires: 1
fuel tank, LH side lower
Requires: 1
lower bumper mounting
Requires: 2
Ferpox - 1-part epoxy primer
Content: 800 ml ($37.29 / 1000 ml)
Content: 800 ml ($37.29 / 1000 ml)
