Cylinder block and oil filter
wing type made from brass - with 9/16" BSP thread
Alternatives
Requires: 1
wing type made from steel - with 9/16" BSP thread
Alternatives
Requires: 1
dipstick
Requires: 1
for oil pressure relief valve, uprated version allows working pressure of 75 to 85 PSI
Requires: 1
- improved version
May replace original nut 5093 and washer 212195
Requires: 10
cylinder block, front - reproduction in aluminium
Requires: 1
crankshaft sealing block, front. Wooden variant with following dimensions: 25 x 15 x 6 mm
Requires: 2
identify by single timing mark
MK3, MK4 to engine no. FH25000 and FM25000
Requires: 1
identify by multiple timing mark
MK4 from engine no. FH25001 and FM25001, all 1500
Requires: 1
front
MK3 to engine no.FD38088 und FE38088
Requires: 1
front
MK3 from engine no.FD38089 and FE38089, all MK4 and 1500
Requires: 1
front - made from aluminium. The weight of 800 grams will remove more than 1.5 kilos from the front of your engine
May replace original engine plates 486860 and 5534
Requires: 1
oil seal
Requires: 1
matt black
Requires: 1
Content: 400 ml ($57.30 / 1000 ml)
Content: 400 ml ($57.30 / 1000 ml)
