SU-H6 internal carburettor - TR3, TR3A, TR3B and TR4
rear carburettor
Requires: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Requires: 4
for 5/16" throttle spindles with standard size. Length: 115 mm
Requires: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Requires: 1
for SU-H6 and HD6 carburettors - variant with standard size. Length: 6.3/8", diameter: 5/16", with slot for 1.1/2" and 1.3/4" throttle discs
Requires: 2
for SU-H6 and HD6 carburettors - variant with 0.010" oversize
Requires: 2
front
Requires: 1
rear
Requires: 1
with cork glands - for SU-H type carburettors with fixed needle
Requires: 2
with treated rubber seals - for SU-H type carburettors with fixed needle
Requires: 2
jet bearing
Contains all sealing rings and washer
Requires: 2
for single SU-H6 type carburettor. Comprising service kit 200206 plus throttle disc and throttle spindle
Comprising service kit 200206 plus throttle disc and throttle spindle
Requires: 2
with piston
Requires: 2
float lid
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
float lid
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 4
and spring - inside float chamber lid on SU carburettors
TR3, TR3A to 1959 - identified by float lid with banjo bolt to adapt overflow pipe
Requires: 2
float lid - with hexagonal zinc plated head
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
float chamber on SU-H and SU-HD carburettors. Made from plated brass, length: 19"
TR3, TR3A to 1959 – features: float lid with banjo bolt to adapt overflow pipe
Requires: 2
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
front and rear carburettor
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
float lid
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
front carburettor
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 1
rear carburettor
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 1
overflow pipe to carburettor
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
carburettor
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Requires: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Requires: 2
TR3, TR3A to 1959 - identified by float lid with banjo bolt to adapt overflow pipe
Requires: 4
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
float chamber to carburettor body - feature: 7/16" BSF thread
TR3, TR3A to 1959 - identify by float lid with banjo bolt to adapt overflow pipe
Requires: 2
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
float chamber to carburettor body - feature: 3/8" BSF thread
TR3A from 1959 and all TR4 (1961-65) - identified by float lid with push-on to adapt overflow pipe
Requires: 2
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 2
TR3A from 1959 and TR4 - identify by float lid with push-on to adapt overflow pipe
Requires: 4
