Lucas distributor 22D6 type with auto-ignition vacuum - TR6 Carburettor from May 1975
22D6 top entry type with vacuum unit, Lucas no. 41558 - reconditioned, in exchange
Serial no. LU41558
Requires: 1
for Lucas 22D6 and 25D6 top entry distributor. Identified by push fit ignition leads
Requires: 1
with spring - inside Lucas 22D and 25D distributor cap
Requires: 1
improved version for Lucas 22D6, 25D6, DMBZ6 and DVX6A distributors. Please note: distributor rotation anti-clockwise
Requires: 1
for Lucas distributors. Variant with lucar terminal. Please note: downward pointing connector
Requires: 1
for Lucas DM2, DM2P4, 22D, 23D and 25D distributor - one-piece type for distributors with a 3 mm long peg on base plate
Alternatives
Requires: 1
for Lucas DM2, DM2P4, 22D, 23D and 25D distributors - competition two-piece type with 32 oz for distributors with a 9 mm long peg on base plate
Alternatives
Requires: 1
for Lucas DM2, DM2P4, 22D, 23D and 25D distributors - competition two-piece type with 32 oz for distributors with a 9 mm long peg on base plate
Requires: 1
with vacum code 3-10-7R 'retard' and push on vacuum pipe. Fits Lucas 22D6 distributor 41385 and 41558
Requires: 1
distributor
Requires: 1
tachometer drive gear
Requires: 1
Requires: 1
supplied in a set of 5 selective springs
Requires: 1
with 16 pre-programmed advance curves - for 6 cylinder engines with Lucas distributors. For negative earth cars with electric tachometer
Requires: 1
Requires: 1
EGR valve to cylinder head
Requires: 1
EGR valve to inlet manifold
Requires: 1
EGR valve pipe to inlet manifold
Requires: 1
securing flame trap on rocker cover, rear
Requires: 1
flame trap to bracket
Requires: 1
vacuum hose - straight
Requires: 2
securing flame trap on rocker cover, front
Requires: 1
flame trap to bracket
Requires: 1
