Gearbox, non overdrive specification - inner
Transmax Manual EP 80W-90
1st speed gear
To chassis no. CF12500 and CR5000
Requires: 1
1st speed gear
From chassis no. CF12501 and CR5001
Requires: 1
1st speed - new item
To gearbox no. CD20281
Requires: 1
1st speed
From gearbox no. CD21769
Requires: 1
1st and 2nd speed
To gearbox no. CD20281
Requires: 1
1st and 2nd speed
From gearbox no. CD20282
Requires: 1
sleeve - 1st and 2nd speed
Requires: 1
1st speed gear - 0.118"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.121"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.124"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.126"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.127"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.13"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.132"
To chassis no. CF12500 and CR5000.
1st speed gear - 0.138"
To chassis no. CF12500 and CR5000.
0.200 to 0.202"
From chassis no. CF12501 and CR5001
2nd speed
From gearbox no. CD20282 to CD21768
Requires: 1
2nd speed
From gearbox no. CD21769 to chassis no. CF12500 and CR5000
Requires: 1
2nd speed gear - original equipment
To chassis no. CF12500 and CR5000
Requires: 1
2nd speed gear - uprated version
To chassis no. CF12500 and CR5000
Requires: 1
2nd speed gear
From chassis no. CF12501 and CR5001
Requires: 1
3rd speed gear
To chassis no. CF12500 and CR5000
Requires: 1
3rd speed gear
From chassis no. CF12501 and CR5001
Requires: 1
3rd and 4th speed
To gearbox no. CD20281
Requires: 1
3rd and 4th speed
From gearbox no. CD20282
Requires: 1
inner section - 3rd and 4th gear
From gearbox no. CD20282
Requires: 1
gearbox end - round type
May replace original square flange
Requires: 1
Requires: 1
Requires: 1
To gearbox no. CD20281
Requires: 1
From gearbox no. CD20282 to CD21768
Requires: 1
From gearbox no. CD21769 to chassis no. CF12500 and CR5000
Requires: 1
mainshaft - shelled type
To gearbox no. CD20281
Requires: 1
mainshaft - open cage type
From gearbox no. CD20282
Requires: 1
contains first motion shaft and constant gear
To gearbox no. CD20281
Requires: 1
From gearbox no. CD20282 to CD21768
Requires: 1
closed cage type with 27.01 to 27.02 mm outer diameter. Please note: this bearing must be heat shrining to the 1st motion shaft
Requires: 2
shell type - original equipment
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Requires: 2
shelled type - reproduction
May replace open cage needle bearing with spacer and circlip (ill. 41 to 43)
Requires: 2
with 16 teeth - complete unit including 1st gear and reverse gear
To chassis no. CF12500 and CR5000
Requires: 1
with 1st and reverse gear. Feature: 17 teeth
From chassis no. CF12501 and CR5001
Requires: 1
constant mesh 4th speed
To gearbox no. CD20281.
This part is only available in kit 1816 (ill. 33)
Requires: 1
constant mesh 4th speed
From gearbox no. CD20282 to CD21768
Requires: 1
