Manual steering - Series 1 and 2 (1961-70)
nueva parte. Para modelos LHD sin dirección asistida
Requires: 1
nueva parte. Para modelos RHD sin dirección asistida
Requires: 1
with pinion. Identify by 8 teeth pinion
Series 1 and 1.5 (1961-1967)
Requires: 1
with pinion. Identify by 7 teeth pinion
Series 2 (1968-1970)
Requires: 1
upper position. Identify by: 8 teeth pinion
Series 1 and 1.5 (1961-1967)
Requires: 1
upper position. Identify by: 7 teeth pinion
Series 2 (1968-1970)
Requires: 1
pinion
Requires: 1
rubber mounting steering rack
Requires: 1
Requires: 1
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850001 to 850499 (RHD), from 875001 to 877275 (LHD) and FHC from 860001 to 860425 (RHD) and 885001 to 886045 (LHD) (1961-62)
Requires: 2
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850001 to 850558 (RHD), from 875001 to 877578 (LHD) and FHC from 860001 to 860691 (RHD) and 885001 to 886305 (LHD) (1961-62)
Requires: 1
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850500 to 850558 (RHD), from 877276 to 877578 (LHD) and FHC from 860426 to 860691 (RHD) and 886046 to 886305 (LHD) (1961-62)
Requires: 2
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850559 (RHD), from 877579 (LHD) and FHC from 860692 (RHD) and 886309 (LHD) (1963-70)
Requires: 3
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850001 to 850499 (RHD), from 875001 to 877275 (LHD) and FHC from 860001 to 860425 (RHD) and 885001 to 886045 (LHD) (1961-62)
Requires: 2
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850001 to 850558 (RHD), from 875001 to 877578 (LHD) and FHC from 860001 to 860691 (RHD) and 885001 to 886305 (LHD) (1961-62)
Requires: 1
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850500 to 850558 (RHD), from 877276 to 877578 (LHD) and FHC from 860426 to 860691 (RHD) and 886046 to 886305 (LHD) (1961-62)
Requires: 2
to pinion housing, upper
3.8 Series 1 OTS from chassis no. 850559 (RHD), from 877579 (LHD) and FHC from 860692 (RHD) and 886309 (LHD) (1963-70)
Requires: 3
for steering rod in rack and pinion - steel reproduction
Requires: 2
for steering rod in rack and pinion - plastic reproduction
Requires: 2
for steering rod pan - feature: 25.3 mm outer diameter and 0.27 mm thickness
Requires: 2
securing gaiter
Requires: 1
securing track rod end
3.8 Series 1 (1961-64)
Requires: 2
securing track rod end
4.2 Series 1 and 2 (1965-70)
Requires: 2
rack bar
Requires: 1
plunger
Requires: 1
plunger
Requires: 1
