Hub, shock absorber and wishbone
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
Requires: 2
inner fulcrum shaft bearing
3.8 Series 1 to chassis no. OTS 850678 (RHD) and to 879131 (LHD) also FHC to 861105 (RHD) and to 888326 (LHD) (1961-62)
2 per side
Requires: 2
inner fulcrum shaft bearing
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
2 per side
Requires: 2
inner fulcrum shaft bearing
3.8 Series 1 to chassis no. OTS 850678 (RHD) and to 879131 (LHD) also FHC to 861105 (RHD) and to 888326 (LHD) (1961-62)
Requires: 2
inner fulcrum shaft bearing
3.8 Series 1 from chassis no. OTS 850679 (RHD) and from 879132 (LHD) also FHC from 861106 (RHD) and from 888327 (LHD) (1962-70)
2 per side
Requires: 2
0.003" between original type sleeves only
not required with sleeve 204064
fulcrum shaft
3.8 Series 1 to chassis no. OTS 850503 (RHD) and to 877182 (LHD) also FHC to 860450 (RHD) and to 885984 (LHD) (1961-62)
Requires: 4
3.8 Series 1 from chassis no. OTS 850001 to 850943 (RHD) and from 875001 to 881887 (LHD), FHC from 860001 to 861799 (RHD) and from 885001 to 890873 (LHD) (1961-64)
Requires: 2
All 4.2 liter models. From engine number 7E1001 and 7R1001 (1964-1970)
Requires: 2
Requires: 2
rear wheel bearing - outer position. Rubber reproduction
3.8. and 4.2. Series 1 to chassis number OTS 1E1236 (RHD) and to 1E10978 (LHD), FHC to 1E20638 (RHD) and 1E31002 (LHD) (1961-65)
Requires: 2
serie 1 desde 1965: OTS desde 1E1237 (RHD) y 1E10979 (LHD), FHC desde 1E20639 (RHD) y1E31003 (LHD) asi como todos E-Type 4.2 serie 2 (1968-70)
Requires: 2
4.2 serie 1 desde 1965: OTS desde 1E1237 (RHD) y 1E10979 (LHD), FHC desde 1E20639 (RHD) y1E31003 (LHD) asi como todos E-Type 4.2 serie 2 (1968-70)
Requires: 2
eje de transmisión - construcción reforzada
Requires: 4
plastic, hole: 1", outer diameter: 1.3/8"
Requires: 1
varilla de empuje, eje trasero - posición delantera, versión "Comfort"
Requires: 2
varilla de empuje, eje trasero - posición delantera, versión "Race"
Requires: 2
varilla de empuje, eje trasero - posición trasera, versión "Comfort"
Requires: 2
vvarilla de empuje, eje trasero - posición trasera, versión "Race"
Requires: 2
radius arm
Series 1 and 2: OTS and FHC models (1961-70)
Requires: 1
radius arm
4.2 Series 1 and 2: 2+2 models (1966-70)
Requires: 1
radius arm to body
Requires: 1
rear suspension craddle - high quality aftermarket product
Requires: 4
Suspensión diferencial y trasera. Nueva pieza, chorreada con chorro de arena y recubierta de polvo negro
Jaguar: E-Type serie 1 y 1.5 (1961-68) - Característica: todos verhículos con sistema de freno Dunlop
Requires: 1
Suspensión diferencial y trasera. Nueva pieza, chorreada con chorro de arena y recubierta de polvo negro
Jaguar: E-Type serie 2 (1968-70) - Característica: todos verhículos con sistema de freno Girling
Requires: 1
3.8 Series 1 up to chassis number OTS 850678 (RHD) and up to 879131 (LHD) and FHC up to 861105 (RHD) and up to 888326 (LHD) (1962-70)
Requires: 1
3.8 Series 1 from chassis number OTS 850678 (RHD) and from 879131 (LHD) also FHC from 861105 (RHD) and from 888326 (LHD) (1962-70)
Requires: 1
rear - spring rate: 233 lb/ins, free length: 9" (lowered height), inner diameter: 2.1/2"
Requires: 4
rear coil spring - bottom. Dimensions: 56 mm ID and 80 mm OD
Requires: 1
shock absorber
most replacement shock absorbers are now supplied with the cover
Requires: 1
at top of coil spring
use with standard shock absorbers
Requires: 4
at top of coil spring
use with Koni shock absorbers
Requires: 1
rear axle
Series 1 and 2 all OTS and FHC (1961-70)
Requires: 1
rear axle
Series 1 and 2 all 2+2 (1966-70)
Requires: 1
para los ejes delanteros y traseros
Jaguar: E-Type serie 1 y 2 (1961-70)
Requires: 1
Requires: 1
Requires: 1
RH rear - used item
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Requires: 1
LH rear - used item
3.8 Series 1 (1961-62): OTS to chassis no. 850678 (RHD) and 879131 (LHD), FHC to chassis no. 861105 (RHD) and 888326 (LHD)
Requires: 1
rear suspension - set of two
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Requires: 1
RH rear - used item
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Requires: 1
LH rear - used item
3.8 Series 1 (1962-64): OTS from chassis no. 850679 and 879132, FHC from chassis no. 861106 and 888327 plus all 4.2 Series 1 and 2 models (1964-70)
Requires: 1
Requires: 2
Requires: 2
Requires: 2
Requires: 2
with 51 mm diameter and 300 mm length
Requires: 2
para los ejes delanteros y traseros
Jaguar: E-Type serie 1 y 2 (1961-70)
Requires: 2
drive shaft, splined
Requires: 2
rear suspension
4.2 Series 1 from 1965: OTS from 1E1237 (RHD) and 1E10979 (LHD), FHC from 1E20639 (RHD) and 1E31003 (LHD ) plus all 4.2 Series 2 (1968-70)
Requires: 2
