Culata
on rocker cover with golden 'Jaguar' domed acrylic letters on black surface. Dimensions: 95 x 38 mm
Requires: 2
RH
Requires: 1
camshaft block - length: 2"
To engine no. 7P47586
Requires: 4
camshaft block - length: 3.7/8"
To engine no. 7P47586
Requires: 4
camshaft block - length: 1.1/2"
to engine no. 7P47586
Requires: 12
camshaft block to cylinder head
To engine no. 7P47586
Requires: 12
retaining camshaft bearing caps
To engine no. 7P47586
Requires: 28
LH (B-bank)
To engine no. 7P47586
Requires: 1
camshaft block - length: 2"
From engine no. 7P47587
Requires: 4
camshaft block - length: 3.3/4"
From engine no. 7P47587
Requires: 4
camshaft block - length: 37 mms
From engine no. 7P47587
Requires: 12
camshaft block to cylinder head
From engine no. 7P47587
Requires: 12
retaining camshaft bearing caps
From engine no. 7P47587
Requires: 28
LH
From engine no. 7P47587
Requires: 1
para motores Jaguar XK6 y motores 6.0 V12 (diámetro 17,44 mm <> 0,6126 pulgadas)
Requires: 1
top, for inlet valve and exhaust valve - aftermarket
Requires: 24
- repro
To engine no. 7P45000 - not HE engines.
Alternatives
Requires: 12
From engine no. 7P45001 - HE engines only.
Alternatives
Requires: 12
- repro
From engine no. 7P45001 - HE engines only.
Alternatives
Requires: 12
RH - exchange
To engine no. 7P45000 - not HE engines.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
LH - exchange
To engine no. 7P45000 - not HE engines.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
RH - exchange
From engine no. 7P45001 to 7P47586 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
LH - exchange
From engine no. 7P45001 to 7P47586 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
RH - exchange
From engine no. 7P47587 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
LH - exchange
From engine no. 7P47587 - HE engines only.
Full recondition fitting of all new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Requires: 1
inlet valve +0.003" (1st oversize). Steel type
Requires: 12
inlet valve +0.005" (2nd oversize). Steel type
Requires: 12
exhaust valve +0.003" (1st oversize). Steel type
To engine no. 7P45000 - not HE engines
Requires: 12
exhaust valve +0.005" (2nd oversize). Steel type
To engine no. 7P45000 - not HE engines
Requires: 12
exhaust valve +0.003" (1st oversize). Steel type
From engine no. 7P45001 - HE engines only
Requires: 12
exhaust valve +0.005" (2nd oversize). Steel type
From engine no. 7P45001 - HE engines only
Requires: 12
cylinder head - uprated flange nut with 3/8" UNF thread and 9/16" AF spanner size
Requires: 24
chromed dome nut with flat head, 7/16" UNF thread and 3/4" AF spanner size
Requires: 28
for warning light
Requires: 1
XJ12 Serie I, Serie II al número de motor 7P25000 (1972-75)
Requires: 1
Requires: 1
flexible, steel braided, feed pipe from block to cylinder head
Serise I and II, Series III to engine no. 7P42299 (1972-81)
Requires: 1
flexible, steel braided, feed pipe from block to cylinder head
Series III from engine no. 7P42300 (1981-92)
Requires: 1
oil temperature
From engine no. 7P42300
Requires: 1
oil feed pipe to head
Genuine type - 7/8" long
Requires: 2
oil feed pipe to head
Repair bolt - 1.1/4" long
Requires: 2
oil feed pipe
To engine no. 7P42299
Requires: 1
oil feed pipe
from engine no. 7P42300
Requires: 1
sides of cylinder head
To engine no. 7P45000
Requires: 14
sides of cylinder head
From engine no. 7P45001
Requires: 14
RH
To engine no. 7P45000 - not HE engines
Requires: 1
LH
To engine no. 7P45000 - not HE engines
Requires: 1
RH ('A' bank) - for vehicles with HE engines
XJ12 Series III from engine no. 7P45001 (1981-92)
Requires: 1
LH ('B' bank) - for vehicles with HE engines
XJ12 Series III from engine no. 7P45001 (1981-92)
Requires: 1
inlet, hardened, semi finished. For lead free applications
To engine no. 7P45000 - not HE engines.
For lead free applications
Requires: 12
exhaust, hardened, semi finished. For lead free applications
To engine no. 7P45000 - not HE engines.
For lead free applications
Requires: 12
inlet, hardened
From engine no. 7P45001 - HE engines only.
For lead free applications
Requires: 12
exhaust, hardened
From engine no. 7P45001 - HE engines only.
For lead free applications
Requires: 12
XJ12 Series I (1972-73), XJ12 Series II to engine no. 7P25000 (Carburettor models only)
Requires: 1
with high quality Cometic CFM head gaskets with 93 mm bore size and 0.59" built in thickness
XJ12 Series I (1972-73), XJ12 Series II to engine no. 7P25000 (Carburettor models only)
Requires: 1
Series II fuel injection cars, Series III to engine no. 7P45000 - not HE engines
Requires: 1
fits vehicles with HE engines only
Series III from engine no. 7P45001
Requires: 1
aftermarket - fits vehicles with HE engines only
Series III from engine no. 7P45001
Requires: 1
