Despiece Carburador SU-H6 - XK150
with piston
Requires: 2
fixed type. For standard mixture - marked: TL
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Requires: 2
fixed type. For standard mixture - marked: TU
Use with carburettors with following number: AUC985
Requires: 2
fixed type. For weakmixture - marked: SJ
Requires: 2
fixed type. For rich mixture - marked: WO3
Requires: 2
front carburettor
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Requires: 1
rear carburettor
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Requires: 1
front carburettor
Use with carburettors with following number: AUC985
Requires: 1
rear carburettor
Use with carburettors with following number: AUC985
Requires: 1
for 5/16" throttle spindles with standard size
Length: 115 mm
Requires: 1
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Requires: 1
idle control - complete kit with spring and washers
Requires: 2
throttle spindle on rear carburettor
Requires: 1
for ignition union on front carburettor
Requires: 1
para carburadores SU-H, SU-HD y SU-HS - sustituye la válvula de aguja flotante
Requires: 2
flotador - altura del soporte de la cubierta a la suspensión de la horquilla: 1/4". Sólo encaja con la tapa de la cámara del flotador original
Requires: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Requires: 2
float chamber and cast pipe to front carburettor
Requires: 1
between banjo bolt and cast pipe
Requires: 1
between cast pipe and thermo carburettor
Requires: 2
for single carburettor
Comprising service kit 200203 (iil. 66) plus throttle disc and throttle spindle
Requires: 2
