Despiece Carburador SU-H8 - XK150s
dashpot spring
Requires: 3
with piston
Requires: 3
fixed type. For standard mixture - marked: UE
Requires: 3
for 5/16" throttle spindles with standard size
Length: 115 mm
Requires: 1
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Requires: 1
idle control - complete kit with spring and washers
Requires: 3
throttle spindle on rear carburettor
Requires: 1
for ignition union on front carburettor
Requires: 1
with locking nut assembly. SU-HD carburettors with fixed needle
Requires: 3
centre and rear carburettor
Requires: 2
para carburadores SU-H, SU-HD y SU-HS - sustituye la válvula de aguja flotante
Requires: 3
flotador - altura del soporte de la cubierta a la suspensión de la horquilla: 1/4". Sólo encaja con la tapa de la cámara del flotador original
Requires: 3
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Requires: 3
float chamber and cast pipe to front carburettor
Requires: 1
between banjo bolt and cast pipe
Requires: 1
between cast pipe and thermo carburettor
Requires: 2
para un carburador del tipo: SU-HD8
Requires: 3
para un carburador del tipo: SU-HD8. Incluye todas las piezas del kit de servicio 200204 más la válvula de mariposa y el eje de la válvula de mariposa.
Requires: 3
